Our Series 800HPN includes a feature set designed for a variety of Ultra High Purity and High Purity applications including Semiconductor & Displays, Pharmaceutical, Biotechnology, Food & Beverage, and other processes that require a clean hygienic flow meter.
Master-Touch™ 800HPN Features
Master-Touch Series 800HPN Flow Meters are In-line style instruments with all electronics mounted integrally on the flow section in a Type 4X, IP66 enclosure. All input power and signal output connections are accessible through this double-sided enclosure. The Series features a VCR style sensor for easy removal and cleaning. The internal wetted surfaces may be electro-polished to either a 10 Ra or 25 Ra surface finish. Inlet flow conditioning plates are optionally available on flow sections from ¾” to 6”. Mounting is via butt weld ends.
Optional end configurations include – Tri-Clamp style ends or male VCR style ends for ½”, ¾” or 1” tubes.
A 2-line, 16-character LCD display with a 4-button keypad, displays the flow rate, totalized flow total, gas temperatures, electronics temperatures, sensor milliwatts, event/alarm relay status. It also provides access to the menuing system for change of user accessible variables. Included are 0–5 VDC and 4-20 mA outputs proportional to flow, as well as RS232; RS485; Modbus RTU; BACnet communications.
Currently no agency approvals.
(Enclosure Certifications by manufacturer
Standard Type 4X)
Linear signal output
0–5 VDC & 4–20 mA
2 one-amp SPDT relays
RS232 & (RS485 ASCII or Modbus RTU or BACNet)
Optional communication protocols
HART or Profibus DP (24Vdc power only)
Display & Keypad
2-line 16-character LCD with 4 tactile buttons
Accuracy, including linearity (Ref.: 21°C)
±(1% of Reading + 0.5% of Full Scale + GTC)
±0.2% of Full Scale
Sensor response time
1 second to 63% of final value
Turn down ratio
100:1 @ 15 SFPM (.076 NMS) Minimum Reading
Electronics PCB temperature range
-40° to 158°F (-40° to +70°C)
Gas temperature range
-40°C to 66°C (-40° to 150°F), extended ranges available
Maximum flow body rating 500 PSIG
24 Vdc; optional 115VAC or 230VAC 50/60Hz
Transmitter power requirements
Wetted materials 316 Stainless Steel
Internal Flow Body Surface Finish
Internal finish – Typical <=25Ra Max.; Optional <=10Ra Max
Standard temperature & pressure (STP)
70°F & 29.92″ Hg (Density Air @ STP = 0.075 lb/cubic foot)
NIST traceable calibration Standard
NOTE: Specifications subject to change without notice.