Series 9600MP System Control Panel (SCP)

Our System Control Panel (SCP) provides the ability to average multiple sensors for one output flowrate. It can be used with all of our single point or multipoint meters. This allows for a variety of system configurations to address flow profiles that require sensors in various cross sectional positions. You can use our low cost meters on up to our more elaborate multipoint system.

Description

scp_dim.jpg

Series 9600MP System Control Panel

Our System Control Panel (SCP) provides the ability to average multiple sensors for one output flowrate. It can be used with all of our single point or multipoint meters. This allows for a variety of system configurations to address flow profiles that require sensors in various cross sectional positions. You can use our low cost meters on up to our more elaborate multipoint system.

The multiple probes’ output signals are transmitted to a Series 9600MP System Control Panel (SCP) via Modbus RTU communications. At its most basic, this system provides an analog “grand average” output. However, the system’s local Modbus network design also supports communications with each Series MP flow meter, as well as the overall system, for an unparalleled level of command and control when accessed by the user though the Modbus interface.

The System Control Panel (SCP) is housed in a 12″ x 10″ NEMA 4X fiberglass enclosure. The SCP provides the power for the probe assemblies and receives the averaged outputs over a four-wire cable to each probe. It also includes its own microprocessor assembly for system-level control and flow display. The SCP provides two analog output signals (0–5 VDC and 4–20 mA), as well as RS232 & RS485 Modbus RTU communications. The 4–20 mA grand average output can drive up to 1200 ohms. 2-line, 16 character LCD with 4 button keypad for system level control.